You can fix this
Likely cause: a loose handle screw
A two-handle faucet handle that wobbles but still works is held by one screw. Tighten it now, before the wobble chews up the stem tip.
Why this happens
Each handle sits on the ribbed tip of its stem, called the splines, and one screw pulls it down tight. Family Handyman warns that a loose handle gradually grinds away the stem it is screwed to, especially a plastic one. The mistake is living with the wobble: once the ribs wear, the handle loses its grip and spins.
How to fix it
- Close the drain. Delta says knob handles hide the screw under a button you pry off, and lever handles use a set screw you turn with an Allen wrench.
- Tighten the screw until the handle sits firmly on the stem.
- If it will not stay tight, the stem tip is worn. Family Handyman's trick: wrap the stem tip tightly with Teflon thread tape and push the handle back on; in most cases a single wrap gives a snug fit.
- While the handle is off, look at the ribs. Family Handyman says a loose handle grinds the stem away, so ribs that look rounded or smeared mean the tape is buying time and that stem is wearing out.
When to stop. If the screw keeps turning without tightening, the threads in the stem tip are stripped and tape will not hold; that stem needs replacing.
If this does not fix it, tell the plumber
- It is a two-handle faucet and which handle wobbles.
- Whether the screw tightened or kept turning.
- Whether the stem ribs looked rounded when the handle was off.
Build the full list: what to tell the plumber.
Not quite what you are seeing? Other results in this troubleshooter: Call a plumber: the shutoff won't close; a loose set screw or retainer; a broken cartridge or connector; a stripped handle or stem tip; a missing or flipped stem stop; a broken stem on that side; a stripped spigot handle or stem.
Start this troubleshooter over
FourHome is our sister brand. Browse all FourHome replacement faucet and shower parts on the FourHome Amazon store. We earn from purchases made through this link.