Vent, Valve & Volt
Faucet handle loose, wobbly or spinning all the way around

You can fix this

Likely cause: a stripped handle or stem tip

The stem still works, but the handle spins on it. Either the splined socket in the handle or the ribs on the stem have worn smooth.

Why this happens

The handle grips the stem through a splined socket called the broach. Family Handyman says a loose handle grinds the stem away over time, especially a plastic one. Some handles carry a plastic insert: Moen says a broken Monticello handle shows broken plastic inside the handle elbow and hub and needs a new handle adapter. The tell is in your hand: if the socket is chewed or cracked, fix the handle; if the stem ribs are rounded, the stem is the worn part.

How to fix it

  1. Look inside the handle. Broken plastic pieces or a cracked socket mean the handle or its adapter failed; replace that piece for your faucet.
  2. If the handle is fine but the stem ribs are slightly worn, Family Handyman's stopgap is a tight single wrap of Teflon thread tape on the stem tip under the handle.
  3. Lost the original handle or need a different one? Danco makes handle adapters that let a universal handle fit an old stem; its #22 fits American Standard and Colony stems with C-type splines and turns them into a square broach for universal handles.
  4. For a lasting fix on a worn stem, replace it. Close the stop for that side and open the faucet to release pressure. Then, as Delta describes, cover the drain, remove the handle, unscrew the bonnet nut and pull the stem straight up.
  5. Match the new stem by brand, length and spline count using the identification index below. Hot and cold are often different.
  6. On Delta stems, Delta says the stop on the stem points toward the spout for knob handles and to the right for lever handles. Hand-tighten the bonnet, refit the handle and open the stop slowly with the faucet on.

When to stop. If the stop for that side will not close by hand, or it drips when you move it, leave it alone and call a plumber; Bob Vila warns a rusted or worn valve may break if you try to use it. If the bonnet nut will not turn without the faucet body twisting, stop; This Old House gives the same rule on ball faucets when the part below turns with the cap you are loosening, because the supply pipes can break, and says to call a plumber.

The part that fixes it

Stems are brand-specific and often sold as hot or cold. Buy the pair if both sides are the same age.

Replacement for Delta RP1740 Two-Handle Stem Repair Kit

FourHome is our sister brand. We earn from purchases made through this link.

Replacement Two-Handle Ceramic Disc Stem for Delta, Glacier Bay and Luxtra

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Pfister 910-374 Hot and Cold Tub and Shower Stem

FourHome is our sister brand. We earn from purchases made through this link.

Replacement Stem Repair Kit for Pfister 910-374 and 910-013, 5 Pc

  • Cross-reference: Everbilt 865750, Lasco 0-2011, Danco 124162.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Sayco P002 Hot Stem (308 / T-308)

  • 16-point broach.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Sayco P004 Cold Stem (308 / T-308)

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Gerber 98-673 and 98-674 Tub and Shower Stem

  • Cross-reference: Danco 11B.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Speakman G03-0215 Tub and Shower Stem

  • Hot or cold, 3-7/8 in.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Speakman 17088 Tub and Shower Stem

  • Hot or cold, 3-7/8 in.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Kohler Trend Hot Stem

  • Fits: Trend 10606, 10612, 10616, 10620 valves, hot side.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for Kohler Trend Cold Stem

  • Fits: Trend 10606, 10612, 10616, 10620 valves, cold side.

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for American Standard Colony 72855-0700 Long Stem

FourHome is our sister brand. We earn from purchases made through this link.

Replacement for American Standard Colony 50729-0700 Short Stem

FourHome is our sister brand. We earn from purchases made through this link.

Not sure which part you have? Pull the old one and match it by brand, length and broach on Stems & Cartridges, an identification index of faucet stems and cartridges by part number.

If this does not fix it, tell the plumber

  • It is a two or three-handle faucet and the handle spins while the stem still works.
  • Whether the handle socket or the stem ribs are the worn part.
  • The faucet brand and a photo of the stem tip.

Build the full list: what to tell the plumber.

Not quite what you are seeing? Other results in this troubleshooter: Call a plumber: the shutoff won't close; a loose set screw or retainer; a broken cartridge or connector; a loose handle screw; a missing or flipped stem stop; a broken stem on that side; a stripped spigot handle or stem.

Start this troubleshooter over

FourHome is our sister brand. Browse all FourHome replacement faucet and shower parts on the FourHome Amazon store. We earn from purchases made through this link.