Faucet handle loose, wobbly or spinning all the way around
A loose or spinning faucet handle comes down to one small part: the screw that holds the handle, the ribbed tip of the stem, the stop that limits travel, or a broken stem or cartridge. Let's figure out which, starting with whether water is running that you cannot shut off.
Also searched as: faucet handle loose, faucet handle loose on stem, faucet handle loose no screws, faucet handle spins all the way around.
Every question and answer on this page, in order
Question 1: Is water running right now that the handle cannot shut off?
- Yes, it keeps running: go to question 2
- No, the water is off or still controllable: go to question 3
Question 2: Close the shutoff for that faucet. Did it close?
Sink stops are under the sink and close clockwise. A lever stop is closed when it sits across the pipe. If there are none, use the main.
- Yes, the water stopped: go to question 3
- No, it is stuck, it leaks, or I can't find one: Call a plumber: the shutoff won't close
Question 3: What kind of faucet is it?
- One handle (kitchen, bathroom sink or tub): go to question 4
- Two or three separate handles: go to question 5
- Outdoor spigot or hose bib: Likely cause: a stripped spigot handle or stem
Question 4: What is the single handle doing?
- It wobbles or keeps coming loose, but still works: Likely cause: a loose set screw or retainer
- It spins, swings past off or on, or moves with no change in the water: Likely cause: a broken cartridge or connector
Question 5: What is the loose handle doing?
- It wobbles or keeps coming loose, but still works: Likely cause: a loose handle screw
- It turns past off or on with no stop, but still controls the water: Likely cause: a missing or flipped stem stop
- It spins all the way around, or turns with no change in the water: go to question 6
Question 6: Pull the handle off and turn the bare stem tip. What happens?
The handle screw is under the decorative cap or is a small set screw on the side. Press the handle firmly back on the stem, or use a cloth and pliers on the tip, and turn it gently.
- The water changes, so the handle was slipping on the stem: Likely cause: a stripped handle or stem tip
- The stem turns or spins, but the water does not change: Likely cause: a broken stem on that side
Possible results
- Call a proCall a plumber: the shutoff won't close
- Fix it yourselfLikely cause: a loose set screw or retainer
- Fix it yourselfLikely cause: a broken cartridge or connector
- Fix it yourselfLikely cause: a loose handle screw
- Fix it yourselfLikely cause: a stripped handle or stem tip
- Fix it yourselfLikely cause: a missing or flipped stem stop
- Fix it yourselfLikely cause: a broken stem on that side
- Fix it yourselfLikely cause: a stripped spigot handle or stem
Need the words for the phone call? Build a what-to-tell-the-plumber checklist, or read when to call a plumber.