Vent, Valve & Volt
Valve: Plumbing

No hot water at one faucet, but hot everywhere else

When one sink or tub runs cold but the rest of the house gets hot water, the water heater is fine and the problem sits between the wall and the spout: a hot stop that is not fully open, debris in a screen, a cartridge that is turned or stuck, or a hot stem that no longer turns. In a freeze, it can be an ice plug in the hot line. Let's figure out which one you have.

Also searched as: no hot water in kitchen sink but everywhere else, no hot water in bathroom sink but everywhere else, only cold water coming out of faucet, no hot water in kitchen faucet only.

Before you start. If you smell gas near the water heater, leave now and call 911 and your gas utility from outside. Do not turn lights on or off.
Every question and answer on this page, in order

Question 1: Run the hot tap at another sink for a minute. What do you find?

If the sinks are hot and only the shower is cold, use the shower troubleshooter instead: shower valves have their own limit stops and cartridges.

Question 2: Which of these fits?

Pick the first one that is true.

Question 3: Under the sink, is the stop valve on the hot line open all the way?

The hot stop is usually on the left. Turn it counterclockwise by hand only, without forcing it. Tubs often have no stops you can reach; if so, pick the second answer.

Question 4: How many handles does this faucet have?

A single lever that lifts and swings is one handle.

Question 5: Swing the handle all the way to the cold side and let it run a minute. Does hot water come out there?

The standard layout is hot on the left and cold on the right.

Possible results

Need the words for the phone call? Build a what-to-tell-the-plumber checklist, or read when to call a plumber.