Vent, Valve & Volt
Faucet squeals, whistles or chatters when it's on

This one needs a licensed pro

Call a plumber: every hot tap whistles

If every hot tap whistles and cold is quiet, the narrow spot is somewhere on the hot line or at the water heater, not in one faucet. A licensed plumber should find it.

Why this happens

This Old House's plumbing expert Richard Trethewey says faucet noise comes from any place the water supply constricts, naming a worn washer, Teflon tape, a foreign object or even a check valve as spots where water squeezes through and sets up a vibration. When only hot water sings at every tap, the plumber will want to start on the hot line the taps share. Moen adds that thermal expansion from the water heater can push pressure up, and that a spike after running hot water, which settles once cold water runs, is a sign of it.

What to do right now

  1. Confirm it: run hot at two or three faucets in different rooms, then cold at the same ones.
  2. Note whether the noise is worse right after a long hot shower or a dishwasher run. Moen says pressure that spikes after hot water use points to thermal expansion.
  3. If you smell gas near the water heater, do not touch any switches. The Pennsylvania PUC says to leave right away, not to turn lights on or off or make calls from inside, and to call 911 and your gas utility from a safe distance.
  4. Read the water heater's label for its make, model and age, and look for an expansion tank on its pipes. Do not open panels, drain the tank or turn its valves.
  5. Call a licensed plumber. Water heater work beyond reading its label is a plumber's job.

When to stop. Stop at reading the heater's label. Any gas smell means leave the house and call 911 and your gas utility from outside. Any leak at the heater or its pipes, or a hot tap that also loses pressure, means call a plumber now.

What to tell the plumber

  • Every hot tap whistles or squeals, and cold is quiet.
  • Whether it gets worse after heavy hot water use.
  • The water heater's make, model and age, and whether you have an expansion tank or a pressure regulator.

Build the full list: what to tell the plumber.

Not quite what you are seeing? Other results in this troubleshooter: water hammer, not the faucet; Call a plumber: water pressure may be too high; a shutoff left partly closed; Call a plumber: the shutoff valve itself is failing; a clogged or loose aerator; a loose or worn washer on the stem; debris in or wear on the cartridge.

Start this troubleshooter over

FourHome is our sister brand. Browse all FourHome replacement faucet and shower parts on the FourHome Amazon store. We earn from purchases made through this link.